-------------------------------------------------------------------------------- libcamera-apps Bug Report -------------------------------------------------------------------------------- Date: 12-08-2024 (07:46:38) Command: /home/bigstar1023/arducam-camera-bug-report -------------------------------------------------------------------------------- Hardware information -------------------------------------------------------------------------------- ** hostname ** raspberrypi ** uname -r ** 6.6.20+rpt-rpi-2712 ** cat /proc/cpuinfo | tail -n 4 ** Revision : d04170 Serial : 09aabf57d9c90a82 Model : Raspberry Pi 5 Model B Rev 1.0 -------------------------------------------------------------------------------- libcamera verison -------------------------------------------------------------------------------- ** sudo dpkg -l | grep libcamera ** ii libcamera-ipa:arm64 0.2.0+rpt20240215-1 arm64 complex camera support library (IPA modules) ii libcamera-tools 0.2.0+rpt20240215-1 arm64 complex camera support library (tools) ii libcamera0.2:arm64 0.2.0+rpt20240215-1 arm64 complex camera support library ii pipewire-libcamera:arm64 0.3.65-3+rpt6+deb12u1 arm64 PipeWire libcamera plugin ii python3-libcamera:arm64 0.2.0+rpt20240215-1 arm64 complex camera support library (Python bindings) -------------------------------------------------------------------------------- Camera detect -------------------------------------------------------------------------------- ** ls /dev/video* ** /dev/video19 /dev/video20 /dev/video21 /dev/video22 /dev/video23 /dev/video24 /dev/video25 /dev/video26 /dev/video27 /dev/video28 /dev/video29 /dev/video30 /dev/video31 /dev/video32 /dev/video33 /dev/video34 /dev/video35 /dev/video36 /dev/video37 -------------------------------------------------------------------------------- Configuration -------------------------------------------------------------------------------- ** cat /boot/config.txt ** DO NOT EDIT THIS FILE The file you are looking for has moved to /boot/firmware/config.txt ** cat /boot/firmware/config.txt ** # For more options and information see # http://rptl.io/configtxt # Some settings may impact device functionality. See link above for details # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Enable audio (loads snd_bcm2835) dtparam=audio=on # Additional overlays and parameters are documented # /boot/firmware/overlays/README # Automatically load overlays for detected cameras camera_auto_detect=0 dtoverlay=imx708 # Automatically load overlays for detected DSI displays display_auto_detect=0 # Automatically load initramfs files, if found auto_initramfs=0 # Enable DRM VC4 V3D driver dtoverlay=vc4-kms-v3d max_framebuffers=2 # Don't have the firmware create an initial video= setting in cmdline.txt. # Use the kernel's default instead. disable_fw_kms_setup=1 # Run in 64-bit mode arm_64bit=1 # Disable compensation for displays with overscan disable_overscan=1 # Run as fast as firmware / board allows arm_boost=1 [cm4] # Enable host mode on the 2711 built-in XHCI USB controller. # This line should be removed if the legacy DWC2 controller is required # (e.g. for USB device mode) or if USB support is not required. otg_mode=1 [all] ** ls /boot/overlays/* | grep arducam ** /boot/overlays/arducam-64mp.dtbo /boot/overlays/arducam-pivariety.dtbo ** ls /boot/overlays/* | grep imx ** /boot/overlays/imx219.dtbo /boot/overlays/imx258.dtbo /boot/overlays/imx290.dtbo /boot/overlays/imx296.dtbo /boot/overlays/imx327.dtbo /boot/overlays/imx378.dtbo /boot/overlays/imx462.dtbo /boot/overlays/imx477.dtbo /boot/overlays/imx519.dtbo /boot/overlays/imx708.dtbo ** ls /lib/modules/$(uname -r)/kernel/drivers/media/i2c ** ad5398_vcm.ko.xz adv7180.ko.xz ak7375.ko.xz arducam_64mp.ko.xz arducam-pivariety.ko.xz bu64754.ko.xz cs53l32a.ko.xz cx25840 dw9807-vcm.ko.xz imx219.ko.xz imx258.ko.xz imx290.ko.xz imx296.ko.xz imx477.ko.xz imx519.ko.xz imx708.ko.xz ir-kbd-i2c.ko.xz irs1125.ko.xz msp3400.ko.xz mt9v011.ko.xz ov2311.ko.xz ov5647.ko.xz ov64a40.ko.xz ov7251.ko.xz ov7640.ko.xz ov9282.ko.xz saa7115.ko.xz sony-btf-mpx.ko.xz tc358743.ko.xz tvp5150.ko.xz tw2804.ko.xz tw9903.ko.xz tw9906.ko.xz uda1342.ko.xz video-i2c.ko.xz wm8775.ko.xz ** i2cdetect -y -r 10 ** Error: Could not open file `/dev/i2c-10' or `/dev/i2c/10': No such file or directory -------------------------------------------------------------------------------- Memory -------------------------------------------------------------------------------- ** cat /proc/meminfo | grep Cma ** CmaTotal: 327680 kB CmaFree: 311200 kB -------------------------------------------------------------------------------- Cameras -------------------------------------------------------------------------------- ** libcamera-still --list-cameras ** No cameras available! -------------------------------------------------------------------------------- Versions -------------------------------------------------------------------------------- ** uname -a ** Linux raspberrypi 6.6.20+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.20-1+rpt1 (2024-03-07) aarch64 GNU/Linux ** cat /etc/os-release ** PRETTY_NAME="Debian GNU/Linux 12 (bookworm)" NAME="Debian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" -------------------------------------------------------------------------------- libcamera-still -n -t 1000 -o arducam-test.jpg --width 1920 --height 1080 -------------------------------------------------------------------------------- [0:03:59.736798894] [2362]  INFO Camera camera_manager.cpp:284 libcamera v0.2.0+46-075b54d5 ERROR: *** no cameras available *** -------------------------------------------------------------------------------- Logs -------------------------------------------------------------------------------- ** ls -lh arducam-test.jpg ** ls: cannot access 'arducam-test.jpg': No such file or directory ** dmesg | grep arducam ** ** dmesg | grep imx ** [ 2.369952] rp1-cfe 1f00128000.csi: found subdevice /axi/pcie@120000/rp1/i2c@80000/imx708@1a [ 2.954011] imx708 4-001a: failed to read chip id 708, with error -5 [ 2.955681] imx708: probe of 4-001a failed with error -5 ** dmesg | grep ov9281 ** ** dmesg ** [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] [ 0.000000] Linux version 6.6.20+rpt-rpi-2712 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.20-1+rpt1 (2024-03-07) [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 [ 0.000000] OF: reserved mem: 0x000000003fd165c0..0x000000003fd165f7 (0 KiB) nomap non-reusable nvram@0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 14 pages/cpu s183976 r8192 d37208 u229376 [ 0.000000] pcpu-alloc: s183976 r8192 d37208 u229376 alloc=14*16384 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=2C:CF:67:18:04:71 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=78c3e10e-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=US [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521728 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) [ 0.000000] Memory: 7908912K/8380416K available (13376K kernel code, 2222K rwdata, 4288K rodata, 5056K init, 1213K bss, 143824K reserved, 327680K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 43116 entries in 43 pages [ 0.000000] ftrace: allocated 43 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000165] Console: colour dummy device 80x25 [ 0.000170] printk: console [tty1] enabled [ 0.000202] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000208] pid_max: default: 32768 minimum: 301 [ 0.000230] LSM: initializing lsm=capability,integrity [ 0.000292] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) [ 0.000317] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) [ 0.000657] cgroup: Disabling memory control group subsystem [ 0.001055] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001081] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001100] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001154] rcu: Hierarchical SRCU implementation. [ 0.001156] rcu: Max phase no-delay instances is 1000. [ 0.001750] EFI services will not be available. [ 0.001807] smp: Bringing up secondary CPUs ... [ 0.001952] Detected PIPT I-cache on CPU1 [ 0.001994] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] [ 0.002161] Detected PIPT I-cache on CPU2 [ 0.002194] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] [ 0.002345] Detected PIPT I-cache on CPU3 [ 0.002377] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] [ 0.002403] smp: Brought up 1 node, 4 CPUs [ 0.002407] SMP: Total of 4 processors activated. [ 0.002410] CPU features: detected: 32-bit EL0 Support [ 0.002412] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.002414] CPU features: detected: Common not Private translations [ 0.002415] CPU features: detected: CRC32 instructions [ 0.002418] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.002419] CPU features: detected: LSE atomic instructions [ 0.002421] CPU features: detected: Privileged Access Never [ 0.002423] CPU features: detected: RAS Extension Support [ 0.002426] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.002458] CPU: All CPU(s) started at EL2 [ 0.002460] alternatives: applying system-wide alternatives [ 0.004222] devtmpfs: initialized [ 0.007025] Enabled cp15_barrier support [ 0.007031] Enabled setend support [ 0.007091] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.007097] futex hash table entries: 1024 (order: 2, 65536 bytes, linear) [ 0.007952] pinctrl core: initialized pinctrl subsystem [ 0.008124] DMI not present or invalid. [ 0.008299] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.008903] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.008948] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.008996] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.009015] audit: initializing netlink subsys (disabled) [ 0.009080] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 [ 0.009201] thermal_sys: Registered thermal governor 'step_wise' [ 0.009213] cpuidle: using governor menu [ 0.009276] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.009304] ASID allocator initialised with 32768 entries [ 0.009619] Serial: AMBA PL011 UART driver [ 0.010592] bcm2835-mbox 107c013880.mailbox: mailbox enabled [ 0.010938] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 [ 0.010948] printk: console [ttyAMA10] enabled [ 0.015997] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-01-05T15:57:40, variant start_cd [ 0.019998] raspberrypi-firmware soc:firmware: Firmware hash is 30cc5f3700000000000000000000000000000000 [ 0.026357] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.026360] Modules: 0 pages in range for non-PLT usage [ 0.026361] Modules: 129416 pages in range for PLT usage [ 0.034556] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 [ 0.034942] iommu: Default domain type: Translated [ 0.034945] iommu: DMA domain TLB invalidation policy: strict mode [ 0.035035] SCSI subsystem initialized [ 0.035071] usbcore: registered new interface driver usbfs [ 0.035078] usbcore: registered new interface driver hub [ 0.035087] usbcore: registered new device driver usb [ 0.035176] pps_core: LinuxPPS API ver. 1 registered [ 0.035178] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.035183] PTP clock support registered [ 0.035717] vgaarb: loaded [ 0.035814] clocksource: Switched to clocksource arch_sys_counter [ 0.312943] VFS: Disk quotas dquot_6.6.0 [ 0.312958] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 0.312987] FS-Cache: Loaded [ 0.313028] CacheFiles: Loaded [ 0.314300] NET: Registered PF_INET protocol family [ 0.314457] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear) [ 0.316837] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear) [ 0.316895] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) [ 0.316899] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear) [ 0.317167] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear) [ 0.318860] TCP: Hash tables configured (established 65536 bind 65536) [ 0.319005] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear) [ 0.319119] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear) [ 0.319219] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear) [ 0.319368] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.319500] RPC: Registered named UNIX socket transport module. [ 0.319502] RPC: Registered udp transport module. [ 0.319504] RPC: Registered tcp transport module. [ 0.319505] RPC: Registered tcp-with-tls transport module. [ 0.319507] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.319511] PCI: CLS 0 bytes, default 64 [ 0.319660] kvm [1]: IPA Size Limit: 40 bits [ 0.319672] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) [ 0.319693] kvm [1]: vgic interrupt IRQ9 [ 0.319706] kvm [1]: VHE mode initialized successfully [ 0.320083] Initialise system trusted keyrings [ 0.320123] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.320145] zbud: loaded [ 0.320292] NFS: Registering the id_resolver key type [ 0.320298] Key type id_resolver registered [ 0.320300] Key type id_legacy registered [ 0.320306] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.320308] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.320348] F2FS not supported on PAGE_SIZE(16384) != 4096 [ 0.320397] Key type asymmetric registered [ 0.320399] Asymmetric key parser 'x509' registered [ 0.320412] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.320440] io scheduler mq-deadline registered [ 0.320442] io scheduler kyber registered [ 0.320451] io scheduler bfq registered [ 0.320642] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 27) [ 0.320697] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 28) [ 0.320741] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 29) [ 0.320789] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 30) [ 0.320833] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 31) [ 0.320876] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 32) [ 0.322060] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes [ 0.322065] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840 [ 0.322190] Console: switching to colour frame buffer device 240x67 [ 0.323701] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered! [ 0.356023] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.356409] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 34, base_baud = 6000000) is a Broadcom BCM7271 UART [ 0.356465] serial serial0: tty port ttyS0 registered [ 0.356761] iproc-rng200 107d208000.rng: hwrng registered [ 0.356814] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) [ 0.357035] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe [ 0.358843] brd: module loaded [ 0.360187] loop: module loaded [ 0.360303] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.360421] Loading iSCSI transport class v2.0-870. [ 0.361273] usbcore: registered new device driver r8152-cfgselector [ 0.361281] usbcore: registered new interface driver r8152 [ 0.361287] usbcore: registered new interface driver lan78xx [ 0.361294] usbcore: registered new interface driver smsc95xx [ 0.361355] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.361376] dwc_otg: FIQ enabled [ 0.361378] dwc_otg: NAK holdoff enabled [ 0.361380] dwc_otg: FIQ split-transaction FSM enabled [ 0.361382] Module dwc_common_port init [ 0.361502] usbcore: registered new interface driver uas [ 0.361509] usbcore: registered new interface driver usb-storage [ 0.361601] mousedev: PS/2 mouse device common for all mice [ 0.369348] rpi-rtc soc:rpi_rtc: registered as rtc0 [ 0.370811] rpi-rtc soc:rpi_rtc: setting system clock to 2024-08-12T06:42:39 UTC (1723444959) [ 0.371133] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! [ 0.371136] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.373424] sdhci: Secure Digital Host Controller Interface driver [ 0.373426] sdhci: Copyright(c) Pierre Ossman [ 0.373465] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.373653] ledtrig-cpu: registered to indicate activity on CPUs [ 0.373688] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.373700] hid: raw HID events driver (C) Jiri Kosina [ 0.373728] usbcore: registered new interface driver usbhid [ 0.373729] usbhid: USB HID core driver [ 0.374043] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available [ 0.374212] NET: Registered PF_PACKET protocol family [ 0.374242] Key type dns_resolver registered [ 0.379141] registered taskstats version 1 [ 0.379196] Loading compiled-in X.509 certificates [ 0.381694] Key type .fscrypt registered [ 0.381696] Key type fscrypt-provisioning registered [ 0.382424] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: [ 0.382431] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] [ 0.382442] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 [ 0.382448] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 [ 0.382457] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 [ 0.382463] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 0.383825] brcm-pcie 1000120000.pcie: Forcing gen 2 [ 0.384068] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 [ 0.384071] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.384075] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) [ 0.384078] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) [ 0.384092] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 [ 0.384120] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.385024] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.491820] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) [ 0.491841] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 [ 0.491856] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] [ 0.491864] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] [ 0.491871] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] [ 0.491941] pci 0000:01:00.0: supports D1 [ 0.491944] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.503824] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.503833] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] [ 0.503837] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] [ 0.503842] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] [ 0.503847] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] [ 0.503852] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.503856] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] [ 0.503860] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 0.503869] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 0.503941] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 0.503977] pcieport 0000:00:00.0: PME: Signaling with IRQ 39 [ 0.504025] pcieport 0000:00:00.0: AER: enabled with IRQ 39 [ 0.504100] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 [ 0.504104] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 [ 0.504114] rp1 0000:01:00.0: enabling device (0000 -> 0002) [ 0.505258] rp1 0000:01:00.0: chip_id 0x20001927 [ 0.525916] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (2c:cf:67:18:04:71) [ 0.526519] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels [ 0.526781] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.526791] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 [ 0.527255] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 [ 0.527266] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000 [ 0.527339] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.527342] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 [ 0.527346] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed [ 0.527396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 0.527400] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.527403] usb usb1: Product: xHCI Host Controller [ 0.527405] usb usb1: Manufacturer: Linux 6.6.20+rpt-rpi-2712 xhci-hcd [ 0.527408] usb usb1: SerialNumber: xhci-hcd.0 [ 0.527532] hub 1-0:1.0: USB hub found [ 0.527545] hub 1-0:1.0: 2 ports detected [ 0.527682] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 0.527686] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.527688] usb usb2: Product: xHCI Host Controller [ 0.527691] usb usb2: Manufacturer: Linux 6.6.20+rpt-rpi-2712 xhci-hcd [ 0.527693] usb usb2: SerialNumber: xhci-hcd.0 [ 0.527780] hub 2-0:1.0: USB hub found [ 0.527790] hub 2-0:1.0: 1 port detected [ 0.528083] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.528088] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 [ 0.528539] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 [ 0.528550] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000 [ 0.528621] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.528624] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 [ 0.528628] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed [ 0.528669] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 0.528672] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.528675] usb usb3: Product: xHCI Host Controller [ 0.528677] usb usb3: Manufacturer: Linux 6.6.20+rpt-rpi-2712 xhci-hcd [ 0.528680] usb usb3: SerialNumber: xhci-hcd.1 [ 0.528767] hub 3-0:1.0: USB hub found [ 0.528780] hub 3-0:1.0: 2 ports detected [ 0.528909] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 0.528912] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.528914] usb usb4: Product: xHCI Host Controller [ 0.528917] usb usb4: Manufacturer: Linux 6.6.20+rpt-rpi-2712 xhci-hcd [ 0.528919] usb usb4: SerialNumber: xhci-hcd.1 [ 0.528999] hub 4-0:1.0: USB hub found [ 0.529010] hub 4-0:1.0: 1 port detected [ 0.529622] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.529958] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 0.529963] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 0.529968] platform 1000800000.codec: Adding to iommu group 0 [ 0.529979] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 0.529983] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 0.529988] platform 1000880000.pisp_be: Adding to iommu group 0 [ 0.530015] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 0.530018] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 0.530022] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success [ 0.530384] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.530686] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu [ 0.530691] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu [ 0.530695] platform axi:gpu: Adding to iommu group 1 [ 0.530721] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu [ 0.530725] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success [ 0.531051] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.531366] platform 1f00128000.csi: bcm2712_iommu_probe_device: MMU 1000005280.iommu [ 0.531370] platform 1f00128000.csi: bcm2712_iommu_device_group: MMU 1000005280.iommu [ 0.531374] platform 1f00128000.csi: Adding to iommu group 2 [ 0.531379] platform 1f00128000.csi: bcm2712_iommu_attach_dev: MMU 1000005280.iommu [ 0.531382] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success [ 0.531786] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO [ 0.531920] mmc1: CQHCI version 5.10 [ 0.531932] mmc0: CQHCI version 5.10 [ 0.532403] of_cfs_init [ 0.532447] of_cfs_init: OK [ 0.532526] clk: Disabling unused clocks [ 0.567946] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit [ 0.675760] mmc0: new ultra high speed SDR104 SDXC card at address 1388 [ 0.676024] mmcblk0: mmc0:1388 EZSD3 233 GiB [ 0.677222] mmcblk0: p1 p2 [ 0.677320] mmcblk0: mmc0:1388 EZSD3 233 GiB [ 0.722357] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit [ 0.732248] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none. [ 0.732268] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.733179] devtmpfs: mounted [ 0.736401] Freeing unused kernel memory: 5056K [ 0.743843] Run /sbin/init as init process [ 0.743847] with arguments: [ 0.743848] /sbin/init [ 0.743850] splash [ 0.743851] with environment: [ 0.743853] HOME=/ [ 0.743854] TERM=linux [ 0.754595] mmc1: new ultra high speed DDR50 SDIO card at address 0001 [ 0.779823] usb 1-1: new low-speed USB device number 2 using xhci-hcd [ 0.787817] usb 3-1: new full-speed USB device number 2 using xhci-hcd [ 0.932930] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.01 [ 0.932936] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.932939] usb 1-1: Product: USB Keyboard [ 0.932941] usb 1-1: Manufacturer: Logitech [ 0.937209] usb 3-1: New USB device found, idVendor=046d, idProduct=c092, bcdDevice=52.00 [ 0.937213] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 0.937216] usb 3-1: Product: G102 LIGHTSYNC Gaming Mouse [ 0.937218] usb 3-1: Manufacturer: Logitech [ 0.937220] usb 3-1: SerialNumber: 206A33714B42 [ 0.960725] input: Logitech G102 LIGHTSYNC Gaming Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:046D:C092.0001/input/input0 [ 0.960814] hid-generic 0003:046D:C092.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G102 LIGHTSYNC Gaming Mouse] on usb-xhci-hcd.1-1/input0 [ 0.962095] input: Logitech G102 LIGHTSYNC Gaming Mouse Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.1/0003:046D:C092.0002/input/input1 [ 1.006472] NET: Registered PF_INET6 protocol family [ 1.006847] Segment Routing with IPv6 [ 1.006855] In-situ OAM (IOAM) with IPv6 [ 1.019931] hid-generic 0003:046D:C092.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G102 LIGHTSYNC Gaming Mouse] on usb-xhci-hcd.1-1/input1 [ 1.034428] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 1.034438] systemd[1]: Detected architecture arm64. [ 1.036997] systemd[1]: Hostname set to . [ 1.108618] uart-pl011 107d001000.serial: no DMA platform data [ 1.291093] systemd[1]: Queued start job for default target graphical.target. [ 1.312480] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 1.312796] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 1.313051] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 1.313306] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 1.313451] systemd[1]: Created slice user.slice - User and Session Slice. [ 1.313535] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 1.313728] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 1.313758] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-78c3e10e\x2d01.device - /dev/disk/by-partuuid/78c3e10e-01... [ 1.313771] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... [ 1.313813] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 1.313855] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 1.313886] systemd[1]: Reached target slices.target - Slice Units. [ 1.313913] systemd[1]: Reached target swap.target - Swaps. [ 1.313944] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 1.314090] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 1.314156] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 1.314431] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 1.314549] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 1.314683] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 1.316210] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 1.316310] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 1.316471] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 1.317325] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 1.318340] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 1.319414] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 1.319617] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 1.321739] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 1.323223] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 1.324656] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 1.326283] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 1.328014] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 1.329827] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 1.332444] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 1.334605] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 1.336432] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 1.338225] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... [ 1.341023] systemd[1]: Starting systemd-journald.service - Journal Service... [ 1.349691] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 1.352582] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 1.354734] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 1.354858] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 1.354938] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 1.355140] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 1.355546] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 1.355676] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 1.355868] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 1.356678] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 1.356832] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 1.357162] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 1.357275] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 1.357528] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 1.357638] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 1.358968] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 1.360462] systemd[1]: Started systemd-fsckd.service - File System Check Daemon to report status. [ 1.360709] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 1.362294] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 1.364559] fuse: init (API version 7.39) [ 1.365706] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 1.365927] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 1.367112] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 1.369856] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 1.394867] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 1.395382] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 1.395618] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 1.395633] i2c_dev: i2c /dev entries driver [ 1.396973] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 1.423574] input: Logitech USB Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1:1.0/0003:046D:C31C.0003/input/input4 [ 1.425470] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 1.425674] systemd[1]: Started systemd-journald.service - Journal Service. [ 1.487898] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-xhci-hcd.0-1/input0 [ 1.551456] input: Logitech USB Keyboard Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0004/input/input5 [ 1.607558] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 r/w. Quota mode: none. [ 1.611942] input: Logitech USB Keyboard System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0004/input/input6 [ 1.612012] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-xhci-hcd.0-1/input1 [ 1.643721] systemd-journald[135]: Received client request to flush runtime journal. [ 2.184083] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 [ 2.184782] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 [ 2.184992] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 [ 2.190625] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 [ 2.192144] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 [ 2.192294] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 [ 2.192339] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 [ 2.192976] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 [ 2.196902] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 [ 2.203112] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 [ 2.206817] mc: Linux media interface: v0.10 [ 2.259307] input: pwr_button as /devices/platform/pwr_button/input/input7 [ 2.259752] videodev: Linux video capture interface: v2.00 [ 2.283775] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode [ 2.285722] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode [ 2.286103] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 2.286220] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700 [ 2.286224] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000 [ 2.286227] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000 [ 2.286229] pispbe 1000880000.pisp_be: Register nodes for group 0 [ 2.286241] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0 [ 2.286534] pispbe 1000880000.pisp_be: input device node registered as /dev/video20 [ 2.286677] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21 [ 2.286726] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22 [ 2.286761] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23 [ 2.286864] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24 [ 2.286909] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25 [ 2.287008] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26 [ 2.287053] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27 [ 2.287153] pispbe 1000880000.pisp_be: config device node registered as /dev/video28 [ 2.287429] pispbe 1000880000.pisp_be: Register nodes for group 1 [ 2.287588] pispbe 1000880000.pisp_be: input device node registered as /dev/video29 [ 2.287673] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30 [ 2.287756] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31 [ 2.287871] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32 [ 2.290662] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33 [ 2.290953] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34 [ 2.291012] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35 [ 2.291171] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36 [ 2.291417] pispbe 1000880000.pisp_be: config device node registered as /dev/video37 [ 2.323719] rp1-cfe 1f00128000.csi: bcm2712_iommu_of_xlate: MMU 1000005280.iommu [ 2.327539] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 2.333151] rp1-cfe 1f00128000.csi: DW dphy Host HW v1.20 [ 2.333180] rp1-cfe 1f00128000.csi: PiSP FE HW v0.1 [ 2.333689] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.341219] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 2.341556] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 2.341876] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.342184] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.355401] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 2.356822] rpivid 1000800000.codec: Device registered as /dev/video19 [ 2.369952] rp1-cfe 1f00128000.csi: found subdevice /axi/pcie@120000/rp1/i2c@80000/imx708@1a [ 2.414334] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 2.422258] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 2.436809] usbcore: registered new interface driver brcmfmac [ 2.520252] Bluetooth: Core ver 2.22 [ 2.543665] NET: Registered PF_BLUETOOTH protocol family [ 2.543675] Bluetooth: HCI device and connection manager initialized [ 2.543685] Bluetooth: HCI socket layer initialized [ 2.543689] Bluetooth: L2CAP socket layer initialized [ 2.543702] Bluetooth: SCO socket layer initialized [ 2.549616] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu [ 2.550941] Console: switching to colour dummy device 80x25 [ 2.558543] Bluetooth: HCI UART driver ver 2.3 [ 2.558554] Bluetooth: HCI UART protocol H4 registered [ 2.558789] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 2.559099] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 2.559166] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 2.559380] Bluetooth: HCI UART protocol Broadcom registered [ 2.563783] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4]) [ 2.567795] Registered IR keymap rc-cec [ 2.568035] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0 [ 2.568122] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input8 [ 2.575948] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input9 [ 2.578346] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4]) [ 2.660495] Registered IR keymap rc-cec [ 2.660558] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1 [ 2.660627] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input10 [ 2.684976] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input11 [ 2.685128] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4]) [ 2.685291] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4]) [ 2.699026] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4]) [ 2.711595] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 2.711761] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 2.796979] brcmfmac_wcc: brcmf_wcc_attach: executing [ 2.808599] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 2.812042] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 [ 2.861601] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1 [ 2.920301] Bluetooth: hci0: BCM: chip id 107 [ 2.920520] Bluetooth: hci0: BCM: features 0x2f [ 2.921652] Bluetooth: hci0: BCM4345C0 [ 2.921658] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 2.922682] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch [ 2.954011] imx708 4-001a: failed to read chip id 708, with error -5 [ 2.954161] dw9807 4-000c: I2C write STATUS address fail ret = -121 [ 2.954165] dw9807 4-000c: dw9807_ramp I2C failure: -121 [ 2.955174] Console: switching to colour frame buffer device 320x90 [ 2.955407] dw9807 4-000c: I2C write STATUS address fail ret = -121 [ 2.955409] dw9807 4-000c: dw9807_ramp I2C failure: -121 [ 2.955538] dw9807 4-000c: I2C write CTL fail ret = -121 [ 2.955681] imx708: probe of 4-001a failed with error -5 [ 2.974555] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device [ 3.023311] alsactl[549]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 3.293484] Adding 102384k swap on /var/swap. Priority:-2 extents:1 across:102384k SS [ 3.636513] Bluetooth: hci0: BCM: features 0x2f [ 3.637898] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 [ 3.637903] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 [ 3.638197] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) [ 3.937976] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.937984] Bluetooth: BNEP filters: protocol multicast [ 3.937991] Bluetooth: BNEP socket layer initialized [ 3.939872] Bluetooth: MGMT ver 1.22 [ 3.946185] NET: Registered PF_ALG protocol family [ 4.265032] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) [ 4.265043] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode [ 4.268067] pps pps0: new PPS source ptp0 [ 4.268282] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. [ 4.303062] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 6.319589] Bluetooth: RFCOMM TTY layer initialized [ 6.319604] Bluetooth: RFCOMM socket layer initialized [ 6.319614] Bluetooth: RFCOMM ver 1.11 [ 8.363561] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 19.332665] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 64.676345] macb 1f00100000.ethernet eth0: Link is Down [ 149.387697] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52 [ 149.495630] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52 [ 149.599644] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52 [ 149.703631] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52 [ 153.199683] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52 [ 153.307735] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52 [ 153.411720] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52 [ 153.515737] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52 [ 160.211690] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52 [ 160.323709] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52 [ 160.427686] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52 [ 160.531694] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52