-------------------------------------------------------------------------------- libcamera-apps Bug Report -------------------------------------------------------------------------------- Date: 30-03-2023 (12:29:18) Command: ./arducam-camera-bug-report -------------------------------------------------------------------------------- Hardware information -------------------------------------------------------------------------------- ** hostname ** naiyana ** uname -r ** 5.15.84-v7l+ ** cat /proc/cpuinfo | tail -n 4 ** Hardware : BCM2711 Revision : c03114 Serial : 10000000d1226aa3 Model : Raspberry Pi 4 Model B Rev 1.4 -------------------------------------------------------------------------------- libcamera verison -------------------------------------------------------------------------------- ** sudo dpkg -l | grep libcamera ** ii libcamera-apps 0~git20230125+9f08463-1 armhf libcamera-apps ii libcamera-tools 0~git20230124+9b860a66-1 armhf complex camera support library (tools) ii libcamera0:armhf 0~git20230124+9b860a66-1 armhf complex camera support library ii python3-libcamera 0~git20230124+9b860a66-1 armhf complex camera support library (Python 3 bindings) -------------------------------------------------------------------------------- Camera detect -------------------------------------------------------------------------------- ** ls /dev/video* ** /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 /dev/video19 /dev/video20 /dev/video21 /dev/video22 /dev/video23 /dev/video31 -------------------------------------------------------------------------------- Configuration -------------------------------------------------------------------------------- ** cat /boot/config.txt ** # For more options and information see # http://rpf.io/configtxt # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output #hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Uncomment this to enable infrared communication. #dtoverlay=gpio-ir,gpio_pin=17 #dtoverlay=gpio-ir-tx,gpio_pin=18 # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on # Automatically load overlays for detected cameras camera_auto_detect=1 # Automatically load overlays for detected DSI displays display_auto_detect=1 # Enable DRM VC4 V3D driver dtoverlay=vc4-kms-v3d max_framebuffers=2 # Disable compensation for displays with overscan disable_overscan=1 [cm4] # Enable host mode on the 2711 built-in XHCI USB controller. # This line should be removed if the legacy DWC2 controller is required # (e.g. for USB device mode) or if USB support is not required. otg_mode=1 [all] [pi4] # Run as fast as firmware / board allows arm_boost=1 [all] dtoverlay=arducam ** ls /boot/overlays/* | grep arducam ** /boot/overlays/arducam-64mp.dtbo /boot/overlays/arducam.dtbo /boot/overlays/arducam-pivariety.dtbo ** ls /boot/overlays/* | grep imx ** /boot/overlays/imx219.dtbo /boot/overlays/imx258.dtbo /boot/overlays/imx290.dtbo /boot/overlays/imx296.dtbo /boot/overlays/imx327.dtbo /boot/overlays/imx378.dtbo /boot/overlays/imx462.dtbo /boot/overlays/imx477.dtbo /boot/overlays/imx519.dtbo /boot/overlays/imx708.dtbo ** ls /lib/modules/$(uname -r)/kernel/drivers/media/i2c ** ad5398_vcm.ko.xz adv7180.ko.xz arducam_64mp.ko.xz arducam.ko.xz arducam-pivariety.ko.xz cs53l32a.ko.xz cx25840 dw9807-vcm.ko.xz imx219.ko.xz imx258.ko.xz imx290.ko.xz imx296.ko.xz imx477.ko.xz imx519.ko.xz imx708.ko.xz ir-kbd-i2c.ko.xz irs1125.ko.xz msp3400.ko.xz mt9v011.ko.xz ov2311.ko.xz ov5647.ko.xz ov7251.ko.xz ov7640.ko.xz ov9281.ko.xz saa7115.ko.xz sony-btf-mpx.ko.xz tc358743.ko.xz tvp5150.ko.xz tw2804.ko.xz tw9903.ko.xz tw9906.ko.xz uda1342.ko.xz wm8775.ko.xz ** i2cdetect -y -r 10 ** 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- -------------------------------------------------------------------------------- Memory -------------------------------------------------------------------------------- ** cat /proc/meminfo | grep Cma ** CmaTotal: 327680 kB CmaFree: 292056 kB -------------------------------------------------------------------------------- Cameras -------------------------------------------------------------------------------- ** libcamera-still --list-cameras ** No cameras available! -------------------------------------------------------------------------------- Versions -------------------------------------------------------------------------------- ** uname -a ** Linux naiyana 5.15.84-v7l+ #1613 SMP Thu Jan 5 12:01:26 GMT 2023 armv7l GNU/Linux ** cat /etc/os-release ** PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" -------------------------------------------------------------------------------- libcamera-still -n -t 1000 -o arducam-test.jpg --width 1920 --height 1080 -------------------------------------------------------------------------------- [0:01:05.095747404] [1276]  INFO Camera camera_manager.cpp:299 libcamera v0.0.3+40-9b860a66 ERROR: *** no cameras available *** -------------------------------------------------------------------------------- Logs -------------------------------------------------------------------------------- ** ls -lh arducam-test.jpg ** ls: cannot access 'arducam-test.jpg': No such file or directory ** dmesg | grep arducam ** [ 10.616272] arducam-pivariety 10-000c: pivariety_read: Reading register 0x103 failed [ 10.616292] arducam-pivariety 10-000c: probe failed ** dmesg | grep imx ** ** dmesg | grep ov9281 ** ** dmesg ** [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.84-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1613 SMP Thu Jan 5 12:01:26 GMT 2023 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536 [ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:74:89:5D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b7234d22-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB) [ 0.000000] Memory: 3601324K/4050944K available (10240K kernel code, 1386K rwdata, 3308K rodata, 2048K init, 591K bss, 121940K reserved, 327680K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35518 entries in 105 pages [ 0.000000] ftrace: allocated 105 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000019] Switching to timer-based delay loop, resolution 18ns [ 0.000402] Console: colour dummy device 80x30 [ 0.000467] printk: console [tty1] enabled [ 0.000534] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000564] pid_max: default: 32768 minimum: 301 [ 0.000708] LSM: Security Framework initializing [ 0.000924] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000955] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002557] cgroup: Disabling memory control group subsystem [ 0.002806] CPU: Testing write buffer coherency: ok [ 0.002865] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.003335] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004874] Setting up static identity map for 0x200000 - 0x20003c [ 0.005082] rcu: Hierarchical SRCU implementation. [ 0.006108] smp: Bringing up secondary CPUs ... [ 0.007316] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008685] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.009996] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010158] smp: Brought up 1 node, 4 CPUs [ 0.010181] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.010201] CPU: All CPU(s) started in HYP mode. [ 0.010213] CPU: Virtualization extensions available. [ 0.011026] devtmpfs: initialized [ 0.026864] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.027079] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.027116] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.037667] pinctrl core: initialized pinctrl subsystem [ 0.039012] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.043729] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.044557] audit: initializing netlink subsys (disabled) [ 0.044814] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.045489] thermal_sys: Registered thermal governor 'step_wise' [ 0.046303] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.046323] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.046726] Serial: AMBA PL011 UART driver [ 0.061798] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.100093] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-01-05T10:46:54, variant start [ 0.110110] raspberrypi-firmware soc:firmware: Firmware hash is 8ba17717fbcedd4c3b6d4bce7e50c7af4155cba9 [ 0.170794] Kprobes globally optimized [ 0.176956] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.181671] vgaarb: loaded [ 0.182164] SCSI subsystem initialized [ 0.182403] usbcore: registered new interface driver usbfs [ 0.182478] usbcore: registered new interface driver hub [ 0.182553] usbcore: registered new device driver usb [ 0.182974] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.183162] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.183480] pps_core: LinuxPPS API ver. 1 registered [ 0.183495] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.183523] PTP clock support registered [ 0.185305] clocksource: Switched to clocksource arch_sys_counter [ 0.266111] VFS: Disk quotas dquot_6.6.0 [ 0.266222] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.266416] FS-Cache: Loaded [ 0.266630] CacheFiles: Loaded [ 0.267818] simple-framebuffer 3e402000.framebuffer: framebuffer at 0x3e402000, 0x7f8000 bytes [ 0.267842] simple-framebuffer 3e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 [ 0.268376] Console: switching to colour frame buffer device 240x67 [ 0.279150] simple-framebuffer 3e402000.framebuffer: fb0: simplefb registered! [ 0.289003] NET: Registered PF_INET protocol family [ 0.289274] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.290918] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.290953] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.290978] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.291042] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.291116] TCP: Hash tables configured (established 8192 bind 8192) [ 0.291279] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.291318] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.291581] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.296215] RPC: Registered named UNIX socket transport module. [ 0.296232] RPC: Registered udp transport module. [ 0.296246] RPC: Registered tcp transport module. [ 0.296260] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.296281] PCI: CLS 0 bytes, default 64 [ 1.339689] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.342495] Initialise system trusted keyrings [ 1.342817] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.351969] zbud: loaded [ 1.353839] FS-Cache: Netfs 'nfs' registered for caching [ 1.354693] NFS: Registering the id_resolver key type [ 1.354747] Key type id_resolver registered [ 1.354762] Key type id_legacy registered [ 1.354926] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.354942] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.356201] Key type asymmetric registered [ 1.356221] Asymmetric key parser 'x509' registered [ 1.356451] bounce: pool size: 64 pages [ 1.356514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.356750] io scheduler mq-deadline registered [ 1.356769] io scheduler kyber registered [ 1.366587] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.366632] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.366727] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.366820] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000 [ 1.427408] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.427802] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.427824] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.427846] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.427943] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.428195] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.432002] PCI: bus0: Fast back to back transfers disabled [ 1.432352] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.432483] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.432914] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.436727] PCI: bus1: Fast back to back transfers disabled [ 1.436792] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.436821] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.436906] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.436933] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.437354] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.437579] pcieport 0000:00:00.0: PME: Signaling with IRQ 79 [ 1.451853] iproc-rng200 fe104000.rng: hwrng registered [ 1.452243] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.453867] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.467208] brd: module loaded [ 1.477897] loop: module loaded [ 1.478799] Loading iSCSI transport class v2.0-870. [ 1.484226] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.585464] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.586705] usbcore: registered new interface driver r8152 [ 1.586796] usbcore: registered new interface driver lan78xx [ 1.586861] usbcore: registered new interface driver smsc95xx [ 1.638719] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.638779] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.644386] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0001e40000000890 [ 1.645547] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.645576] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.645603] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.646023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.646046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.646066] usb usb1: Product: xHCI Host Controller [ 1.646083] usb usb1: Manufacturer: Linux 5.15.84-v7l+ xhci-hcd [ 1.646099] usb usb1: SerialNumber: 0000:01:00.0 [ 1.646860] hub 1-0:1.0: USB hub found [ 1.646932] hub 1-0:1.0: 1 port detected [ 1.647966] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.647989] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.648008] usb usb2: Product: xHCI Host Controller [ 1.648025] usb usb2: Manufacturer: Linux 5.15.84-v7l+ xhci-hcd [ 1.648041] usb usb2: SerialNumber: 0000:01:00.0 [ 1.648760] hub 2-0:1.0: USB hub found [ 1.648858] hub 2-0:1.0: 4 ports detected [ 1.650829] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.651219] dwc_otg: FIQ enabled [ 1.651233] dwc_otg: NAK holdoff enabled [ 1.651246] dwc_otg: FIQ split-transaction FSM enabled [ 1.651263] Module dwc_common_port init [ 1.651759] usbcore: registered new interface driver uas [ 1.651873] usbcore: registered new interface driver usb-storage [ 1.652085] mousedev: PS/2 mouse device common for all mice [ 1.658059] sdhci: Secure Digital Host Controller Interface driver [ 1.658077] sdhci: Copyright(c) Pierre Ossman [ 1.658837] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.662773] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663116] hid: raw HID events driver (C) Jiri Kosina [ 1.663320] usbcore: registered new interface driver usbhid [ 1.663335] usbhid: USB HID core driver [ 1.672660] Initializing XFRM netlink socket [ 1.672706] NET: Registered PF_PACKET protocol family [ 1.672822] Key type dns_resolver registered [ 1.673318] Registering SWP/SWPB emulation handler [ 1.674155] registered taskstats version 1 [ 1.674196] Loading compiled-in X.509 certificates [ 1.675097] Key type .fscrypt registered [ 1.675113] Key type fscrypt-provisioning registered [ 1.688240] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.688569] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.688700] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 1.698154] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.698699] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.700017] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.700038] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.729112] of_cfs_init [ 1.729337] of_cfs_init: OK [ 1.766734] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.767190] Waiting for root device PARTUUID=b7234d22-02... [ 1.869639] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 1.870687] mmcblk0: mmc0:aaaa SC32G 29.7 GiB [ 1.873164] mmc1: new high speed SDIO card at address 0001 [ 1.878523] mmcblk0: p1 p2 [ 1.879110] mmcblk0: mmc0:aaaa SC32G 29.7 GiB (quirks 0x00004000) [ 1.902776] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 1.902869] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.903648] devtmpfs: mounted [ 1.914772] Freeing unused kernel image (initmem) memory: 2048K [ 1.925660] Run /sbin/init as init process [ 1.925677] with arguments: [ 1.925689] /sbin/init [ 1.925702] splash [ 1.925715] with environment: [ 1.925728] HOME=/ [ 1.925740] TERM=linux [ 1.935342] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.117963] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 2.117999] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.118018] usb 1-1: Product: USB2.0 Hub [ 2.120346] hub 1-1:1.0: USB hub found [ 2.120639] hub 1-1:1.0: 4 ports detected [ 2.250953] systemd[1]: System time before build time, advancing clock. [ 2.445381] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd [ 2.462732] NET: Registered PF_INET6 protocol family [ 2.464515] Segment Routing with IPv6 [ 2.464559] In-situ OAM (IOAM) with IPv6 [ 2.554492] systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.555486] systemd[1]: Detected architecture arm. [ 2.562426] systemd[1]: Set hostname to . [ 2.595157] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01 [ 2.595192] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.595212] usb 1-1.1: Product: USB Receiver [ 2.595229] usb 1-1.1: Manufacturer: Logitech [ 2.613131] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C548.0001/input/input0 [ 2.676705] hid-generic 0003:046D:C548.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.1/input0 [ 2.685903] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C548.0002/input/input1 [ 2.686804] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C548.0002/input/input2 [ 2.755824] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C548.0002/input/input3 [ 2.756289] hid-generic 0003:046D:C548.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.1/input1 [ 2.761825] hid-generic 0003:046D:C548.0003: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.1/input2 [ 3.265374] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.460513] systemd[1]: Queued start job for default target Graphical Interface. [ 3.467670] systemd[1]: Created slice system-getty.slice. [ 3.469102] systemd[1]: Created slice system-modprobe.slice. [ 3.470156] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.471040] systemd[1]: Created slice User and Session Slice. [ 3.471618] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.472767] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.473566] systemd[1]: Reached target Slices. [ 3.473806] systemd[1]: Reached target Swap. [ 3.479407] systemd[1]: Listening on Syslog Socket. [ 3.480204] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.480625] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.482044] systemd[1]: Listening on Journal Audit Socket. [ 3.482882] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.483925] systemd[1]: Listening on Journal Socket. [ 3.489311] systemd[1]: Listening on udev Control Socket. [ 3.490335] systemd[1]: Listening on udev Kernel Socket. [ 3.491312] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 3.497299] systemd[1]: Mounting POSIX Message Queue File System... [ 3.504066] systemd[1]: Mounting RPC Pipe File System... [ 3.511498] systemd[1]: Mounting Kernel Debug File System... [ 3.519566] systemd[1]: Mounting Kernel Trace File System... [ 3.520335] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 3.532205] systemd[1]: Starting Restore / save the current clock... [ 3.541043] systemd[1]: Starting Set the console keyboard layout... [ 3.549838] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.559023] systemd[1]: Starting Load Kernel Module configfs... [ 3.567774] systemd[1]: Starting Load Kernel Module drm... [ 3.577557] systemd[1]: Starting Load Kernel Module fuse... [ 3.583076] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.597996] systemd[1]: Starting File System Check on Root Device... [ 3.612747] systemd[1]: Starting Journal Service... [ 3.624244] systemd[1]: Starting Load Kernel Modules... [ 3.637896] systemd[1]: Starting Coldplug All udev Devices... [ 3.658319] systemd[1]: Mounted POSIX Message Queue File System. [ 3.659460] systemd[1]: Mounted RPC Pipe File System. [ 3.660456] systemd[1]: Mounted Kernel Debug File System. [ 3.661544] systemd[1]: Mounted Kernel Trace File System. [ 3.663765] systemd[1]: Finished Restore / save the current clock. [ 3.667429] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.669613] systemd[1]: modprobe@configfs.service: Succeeded. [ 3.673427] systemd[1]: Finished Load Kernel Module configfs. [ 3.682187] systemd[1]: Mounting Kernel Configuration File System... [ 3.700032] fuse: init (API version 7.34) [ 3.718771] systemd[1]: modprobe@fuse.service: Succeeded. [ 3.720432] systemd[1]: Finished Load Kernel Module fuse. [ 3.721814] systemd[1]: Mounted Kernel Configuration File System. [ 3.729350] systemd[1]: Mounting FUSE Control File System... [ 3.737039] systemd[1]: Started File System Check Daemon to report status. [ 3.767033] i2c_dev: i2c /dev entries driver [ 3.780744] systemd[1]: Mounted FUSE Control File System. [ 3.790410] systemd[1]: Finished Load Kernel Modules. [ 3.821532] systemd[1]: Starting Apply Kernel Variables... [ 3.870468] systemd[1]: modprobe@drm.service: Succeeded. [ 3.872196] systemd[1]: Finished Load Kernel Module drm. [ 3.901030] systemd[1]: Finished File System Check on Root Device. [ 3.907580] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.926548] systemd[1]: Finished Apply Kernel Variables. [ 4.091963] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 4.100392] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.106199] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.106565] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 4.112159] systemd[1]: Starting Load/Save Random Seed... [ 4.118954] systemd[1]: Starting Create System Users... [ 4.120685] systemd[1]: Started Journal Service. [ 4.216316] systemd-journald[141]: Received client request to flush runtime journal. [ 4.231190] systemd-journald[141]: File /var/log/journal/8e88cf765be344b7ae1bf3d21a5685a9/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 5.496197] mc: Linux media interface: v0.10 [ 5.624832] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.656137] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 5.756639] bcm2835_audio bcm2835_audio: card created with 8 channels [ 5.758811] videodev: Linux video capture interface: v2.00 [ 5.886335] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 5.886373] [vc_sm_connected_init]: start [ 5.888533] [vc_sm_connected_init]: installed successfully [ 5.925248] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.933808] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 5.944640] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.952337] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.969823] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.971757] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.990589] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 5.992037] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 6.007121] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 6.013430] rpivid feb10000.codec: Device registered as /dev/video19 [ 6.020654] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 6.024566] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 6.062616] i2c i2c-22: Added multiplexed i2c bus 0 [ 6.063605] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 6.082559] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 6.088550] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 6.096944] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 6.097003] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 6.105735] i2c 10-000c: Fixing up cyclic dependency with fe801000.csi [ 6.108090] i2c i2c-22: Added multiplexed i2c bus 10 [ 6.114521] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 6.114621] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 6.115086] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 6.115126] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 6.115489] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 6.115519] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 6.115543] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 6.131570] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 6.131657] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 6.145804] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 6.145885] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 6.169603] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 6.169663] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 6.202500] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 6.203284] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 6.205432] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 6.215090] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 6.215133] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 6.215160] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 6.215184] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 6.215207] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 6.236439] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 6.567739] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 6.715072] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.744315] checking generic (3e402000 7f8000) vs hw (0 ffffffffffffffff) [ 6.744348] fb0: switching to vc4 from simple [ 6.803042] Console: switching to colour dummy device 80x30 [ 6.852991] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.881850] Registered IR keymap rc-cec [ 6.882070] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.882341] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4 [ 6.882788] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.894915] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 6.902416] Registered IR keymap rc-cec [ 6.902637] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 6.902911] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5 [ 6.933339] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 6.934152] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 6.934722] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 6.935197] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.935787] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.936249] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.964094] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.964701] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 7.044025] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 7.468391] Console: switching to colour frame buffer device 240x67 [ 7.468460] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 7.525546] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 7.573494] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 7.574443] usbcore: registered new interface driver brcmfmac [ 7.854728] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 7.863948] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [ 8.212087] uart-pl011 fe201000.serial: no DMA platform data [ 8.867828] 8021q: 802.1Q VLAN Support v1.8 [ 8.868701] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 9.222059] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 9.226357] bcmgenet fd580000.ethernet eth0: Link is Down [ 10.608699] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 10.616272] arducam-pivariety 10-000c: pivariety_read: Reading register 0x103 failed [ 10.616292] arducam-pivariety 10-000c: probe failed [ 15.972337] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.225699] Bluetooth: Core ver 2.22 [ 16.225811] NET: Registered PF_BLUETOOTH protocol family [ 16.225823] Bluetooth: HCI device and connection manager initialized [ 16.226369] Bluetooth: HCI socket layer initialized [ 16.226389] Bluetooth: L2CAP socket layer initialized [ 16.226419] Bluetooth: SCO socket layer initialized [ 16.244763] Bluetooth: HCI UART driver ver 2.3 [ 16.244778] Bluetooth: HCI UART protocol H4 registered [ 16.244830] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 16.245165] Bluetooth: HCI UART protocol Broadcom registered [ 16.467737] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.467752] Bluetooth: BNEP filters: protocol multicast [ 16.467767] Bluetooth: BNEP socket layer initialized [ 16.490143] NET: Registered PF_ALG protocol family [ 16.522155] cryptd: max_cpu_qlen set to 1000 [ 16.823066] Bluetooth: RFCOMM TTY layer initialized [ 16.823096] Bluetooth: RFCOMM socket layer initialized [ 16.823114] Bluetooth: RFCOMM ver 1.11 [ 18.081462] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead [ 31.835377] cam-dummy-reg: disabling [ 32.714384] Bluetooth: Unexpected continuation frame (len 0) [ 32.731860] Bluetooth: Unexpected continuation frame (len 0) [ 32.799196] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 32.799226] Bluetooth: HIDP socket layer initialized [ 32.804760] hid-generic 0005:05AC:024F.0004: unknown main item tag 0x0 [ 32.805731] input: Keychron K8 Keyboard as /devices/platform/soc/fe201000.serial/tty/ttyAMA0/hci0/hci0:11/0005:05AC:024F.0004/input/input6 [ 32.812359] hid-generic 0005:05AC:024F.0004: input,hidraw3: BLUETOOTH HID v1.07 Keyboard [Keychron K8] on e4:5f:01:74:89:5f [ 32.999050] apple 0005:05AC:024F.0004: unknown main item tag 0x0 [ 33.000269] input: Keychron K8 as /devices/platform/soc/fe201000.serial/tty/ttyAMA0/hci0/hci0:11/0005:05AC:024F.0004/input/input8 [ 33.001528] apple 0005:05AC:024F.0004: input,hidraw3: BLUETOOTH HID v1.07 Keyboard [Keychron K8] on e4:5f:01:74:89:5f