-------------------------------------------------------------------------------- libcamera-apps Bug Report -------------------------------------------------------------------------------- Date: 21-06-2022 (07:33:15) Command: /usr/local/bin/camera-bug-report -t 5 -o bug.txt -c libcamera-still -t 1000 -o test.jpg -------------------------------------------------------------------------------- Hardware information -------------------------------------------------------------------------------- ** hostname ** raspberrypi ** cat /proc/cpuinfo ** processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 Hardware : BCM2711 Revision : c03111 Serial : 100000002794301c Model : Raspberry Pi 4 Model B Rev 1.1 -------------------------------------------------------------------------------- Configuration -------------------------------------------------------------------------------- ** cat /boot/cmdline.txt ** console=serial0,115200 console=tty1 root=PARTUUID=3360c6ca-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles ** cat /boot/config.txt ** # For more options and information see # http://rpf.io/configtxt # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output #hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Uncomment this to enable infrared communication. #dtoverlay=gpio-ir,gpio_pin=17 #dtoverlay=gpio-ir-tx,gpio_pin=18 # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on # Automatically load overlays for detected cameras camera_auto_detect=1 # Automatically load overlays for detected DSI displays display_auto_detect=1 # Enable DRM VC4 V3D driver dtoverlay=vc4-kms-v3d max_framebuffers=2 # Disable compensation for displays with overscan disable_overscan=1 [cm4] # Enable host mode on the 2711 built-in XHCI USB controller. # This line should be removed if the legacy DWC2 controller is required # (e.g. for USB device mode) or if USB support is not required. otg_mode=1 [pi4] # Run as fast as firmware / board allows arm_boost=1 [all] #dtoverlay=imx519 dtoverlay=vc4-kms-v3d,cma-512 -------------------------------------------------------------------------------- Logs -------------------------------------------------------------------------------- ** dmesg ** [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.32-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1538 SMP Thu Mar 31 19:39:41 BST 2022 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0, zone HighMem: 256 pages in unavailable ranges [ 0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536 [ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010752 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:5F:4E:CA vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=3360c6ca-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000008890000-0x000000000c890000] (64MB) [ 0.000000] Memory: 3403312K/4049920K available (10240K kernel code, 1390K rwdata, 3292K rodata, 2048K init, 590K bss, 122320K reserved, 524288K cma-reserved, 3263488K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35355 entries in 104 pages [ 0.000000] ftrace: allocated 104 pages with 3 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] random: get_random_bytes called from start_kernel+0x574/0x758 with crng_init=1 [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000019] Switching to timer-based delay loop, resolution 18ns [ 0.000306] Console: colour dummy device 80x30 [ 0.000368] printk: console [tty1] enabled [ 0.000431] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000461] pid_max: default: 32768 minimum: 301 [ 0.000600] LSM: Security Framework initializing [ 0.000751] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000779] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002300] cgroup: Disabling memory control group subsystem [ 0.002535] CPU: Testing write buffer coherency: ok [ 0.002590] CPU0: Spectre BHB: using loop workaround [ 0.003027] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004248] Setting up static identity map for 0x200000 - 0x20003c [ 0.004453] rcu: Hierarchical SRCU implementation. [ 0.005406] smp: Bringing up secondary CPUs ... [ 0.006578] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006595] CPU1: Spectre BHB: using loop workaround [ 0.007885] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007902] CPU2: Spectre BHB: using loop workaround [ 0.009173] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009191] CPU3: Spectre BHB: using loop workaround [ 0.009345] smp: Brought up 1 node, 4 CPUs [ 0.009366] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.009384] CPU: All CPU(s) started in HYP mode. [ 0.009397] CPU: Virtualization extensions available. [ 0.010207] devtmpfs: initialized [ 0.025479] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.025710] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025744] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.041524] pinctrl core: initialized pinctrl subsystem [ 0.042767] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.047144] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.047937] audit: initializing netlink subsys (disabled) [ 0.048191] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.048798] thermal_sys: Registered thermal governor 'step_wise' [ 0.049561] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.049581] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.050003] Serial: AMBA PL011 UART driver [ 0.063367] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.100070] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:19:26, variant start [ 0.110086] raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5 [ 0.168567] Kprobes globally optimized [ 0.174103] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.178664] vgaarb: loaded [ 0.179116] SCSI subsystem initialized [ 0.179343] usbcore: registered new interface driver usbfs [ 0.179403] usbcore: registered new interface driver hub [ 0.179485] usbcore: registered new device driver usb [ 0.179898] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.180709] pps_core: LinuxPPS API ver. 1 registered [ 0.180726] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.180765] PTP clock support registered [ 0.182412] clocksource: Switched to clocksource arch_sys_counter [ 0.263094] VFS: Disk quotas dquot_6.6.0 [ 0.263199] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.263380] FS-Cache: Loaded [ 0.263565] CacheFiles: Loaded [ 0.272770] NET: Registered PF_INET protocol family [ 0.273009] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.274585] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.274619] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.274684] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.274761] TCP: Hash tables configured (established 8192 bind 8192) [ 0.274930] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.274967] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.275223] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.276269] RPC: Registered named UNIX socket transport module. [ 0.276287] RPC: Registered udp transport module. [ 0.276301] RPC: Registered tcp transport module. [ 0.276315] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.276336] PCI: CLS 0 bytes, default 64 [ 1.133795] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.136431] Initialise system trusted keyrings [ 1.136683] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.145654] zbud: loaded [ 1.147619] FS-Cache: Netfs 'nfs' registered for caching [ 1.148515] NFS: Registering the id_resolver key type [ 1.148549] Key type id_resolver registered [ 1.148564] Key type id_legacy registered [ 1.148708] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.148723] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.149815] Key type asymmetric registered [ 1.149832] Asymmetric key parser 'x509' registered [ 1.150059] bounce: pool size: 64 pages [ 1.150121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.150339] io scheduler mq-deadline registered [ 1.150356] io scheduler kyber registered [ 1.161004] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.161044] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.161137] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.161246] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.214513] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.214909] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.214929] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.214951] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.215040] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.215285] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.218976] PCI: bus0: Fast back to back transfers disabled [ 1.219309] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.219439] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.219872] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.223695] PCI: bus1: Fast back to back transfers disabled [ 1.223786] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.223814] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.223899] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.223925] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.224332] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.224565] pcieport 0000:00:00.0: PME: Signaling with IRQ 77 [ 1.235242] iproc-rng200 fe104000.rng: hwrng registered [ 1.235630] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) [ 1.237177] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.249896] brd: module loaded [ 1.260144] loop: module loaded [ 1.260899] Loading iSCSI transport class v2.0-870. [ 1.266137] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.362571] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.363789] usbcore: registered new interface driver r8152 [ 1.363860] usbcore: registered new interface driver lan78xx [ 1.363942] usbcore: registered new interface driver smsc95xx [ 1.366348] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.366527] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.366562] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.372300] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890 [ 1.373684] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.373708] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.373728] usb usb1: Product: xHCI Host Controller [ 1.373745] usb usb1: Manufacturer: Linux 5.15.32-v7l+ xhci-hcd [ 1.373762] usb usb1: SerialNumber: 0000:01:00.0 [ 1.374491] hub 1-0:1.0: USB hub found [ 1.374590] hub 1-0:1.0: 1 port detected [ 1.375265] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.375293] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.375318] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.375828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.375851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.375869] usb usb2: Product: xHCI Host Controller [ 1.375886] usb usb2: Manufacturer: Linux 5.15.32-v7l+ xhci-hcd [ 1.375902] usb usb2: SerialNumber: 0000:01:00.0 [ 1.376609] hub 2-0:1.0: USB hub found [ 1.376682] hub 2-0:1.0: 4 ports detected [ 1.378479] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.378844] dwc_otg: FIQ enabled [ 1.378857] dwc_otg: NAK holdoff enabled [ 1.378871] dwc_otg: FIQ split-transaction FSM enabled [ 1.378887] Module dwc_common_port init [ 1.379334] usbcore: registered new interface driver uas [ 1.379461] usbcore: registered new interface driver usb-storage [ 1.379666] mousedev: PS/2 mouse device common for all mice [ 1.384744] sdhci: Secure Digital Host Controller Interface driver [ 1.384761] sdhci: Copyright(c) Pierre Ossman [ 1.385495] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.389317] ledtrig-cpu: registered to indicate activity on CPUs [ 1.389654] hid: raw HID events driver (C) Jiri Kosina [ 1.389834] usbcore: registered new interface driver usbhid [ 1.389850] usbhid: USB HID core driver [ 1.396068] Initializing XFRM netlink socket [ 1.396111] NET: Registered PF_PACKET protocol family [ 1.396216] Key type dns_resolver registered [ 1.396658] Registering SWP/SWPB emulation handler [ 1.397453] registered taskstats version 1 [ 1.397482] Loading compiled-in X.509 certificates [ 1.398336] Key type ._fscrypt registered [ 1.398353] Key type .fscrypt registered [ 1.398367] Key type fscrypt-provisioning registered [ 1.410595] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.410913] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.411046] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 1.420341] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.420817] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.422093] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.422114] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.453490] of_cfs_init [ 1.458831] of_cfs_init: OK [ 1.489380] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.489843] Waiting for root device PARTUUID=3360c6ca-02... [ 1.551708] mmc1: new high speed SDIO card at address 0001 [ 1.662448] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.845095] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.845120] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.845140] usb 1-1: Product: USB2.0 Hub [ 1.847098] hub 1-1:1.0: USB hub found [ 1.847413] hub 1-1:1.0: 4 ports detected [ 2.172447] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd [ 2.303988] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 2.304011] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.304031] usb 1-1.3: Product: SanDisk 3.2Gen1 [ 2.304047] usb 1-1.3: Manufacturer: USB [ 2.304064] usb 1-1.3: SerialNumber: 01019181b5752930b6d5a561138b97091dd6067f16f5f5088c4e6a80a47c0f5bb0610000000000000000000098b11b95ff9d570083558107a82aa334 [ 2.306951] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 2.307824] scsi host0: usb-storage 1-1.3:1.0 [ 3.353458] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 3.354721] sd 0:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB) [ 3.355446] sd 0:0:0:0: [sda] Write Protect is off [ 3.355468] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 3.356197] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.362255] sda: sda1 sda2 [ 3.364812] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.388036] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 3.388121] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 3.389064] devtmpfs: mounted [ 3.400330] Freeing unused kernel image (initmem) memory: 2048K [ 3.442788] Run /sbin/init as init process [ 3.442804] with arguments: [ 3.442817] /sbin/init [ 3.442829] splash [ 3.442842] with environment: [ 3.442854] HOME=/ [ 3.442867] TERM=linux [ 3.853246] systemd[1]: System time before build time, advancing clock. [ 3.996802] NET: Registered PF_INET6 protocol family [ 3.998542] Segment Routing with IPv6 [ 3.998585] In-situ OAM (IOAM) with IPv6 [ 4.080142] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.081024] systemd[1]: Detected architecture arm. [ 4.083450] systemd[1]: Set hostname to . [ 4.854938] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 5.077825] systemd[1]: Queued start job for default target Graphical Interface. [ 5.079581] random: systemd: uninitialized urandom read (16 bytes read) [ 5.084647] systemd[1]: Created slice system-getty.slice. [ 5.085010] random: systemd: uninitialized urandom read (16 bytes read) [ 5.086048] systemd[1]: Created slice system-modprobe.slice. [ 5.086173] random: systemd: uninitialized urandom read (16 bytes read) [ 5.087130] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.088023] systemd[1]: Created slice User and Session Slice. [ 5.088584] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.089755] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.090433] systemd[1]: Reached target Slices. [ 5.090721] systemd[1]: Reached target Swap. [ 5.091763] systemd[1]: Listening on Syslog Socket. [ 5.092599] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.093057] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.094242] systemd[1]: Listening on Journal Audit Socket. [ 5.095050] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.096095] systemd[1]: Listening on Journal Socket. [ 5.106840] systemd[1]: Listening on udev Control Socket. [ 5.107759] systemd[1]: Listening on udev Kernel Socket. [ 5.108687] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.114304] systemd[1]: Mounting POSIX Message Queue File System... [ 5.120432] systemd[1]: Mounting RPC Pipe File System... [ 5.127543] systemd[1]: Mounting Kernel Debug File System... [ 5.134771] systemd[1]: Mounting Kernel Trace File System... [ 5.135539] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 5.149131] systemd[1]: Starting Restore / save the current clock... [ 5.157330] systemd[1]: Starting Set the console keyboard layout... [ 5.164725] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 5.173118] systemd[1]: Starting Load Kernel Module configfs... [ 5.180215] systemd[1]: Starting Load Kernel Module drm... [ 5.188191] systemd[1]: Starting Load Kernel Module fuse... [ 5.212183] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.225812] systemd[1]: Starting File System Check on Root Device... [ 5.237063] systemd[1]: Starting Journal Service... [ 5.269159] fuse: init (API version 7.34) [ 5.272581] systemd[1]: Starting Load Kernel Modules... [ 5.283032] systemd[1]: Starting Coldplug All udev Devices... [ 5.301923] systemd[1]: Mounted POSIX Message Queue File System. [ 5.302783] systemd[1]: Mounted RPC Pipe File System. [ 5.304186] systemd[1]: Mounted Kernel Debug File System. [ 5.305180] systemd[1]: Mounted Kernel Trace File System. [ 5.309816] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 5.314053] systemd[1]: modprobe@configfs.service: Succeeded. [ 5.316343] systemd[1]: Finished Load Kernel Module configfs. [ 5.321644] systemd[1]: modprobe@fuse.service: Succeeded. [ 5.324336] systemd[1]: Finished Load Kernel Module fuse. [ 5.332707] systemd[1]: Finished Restore / save the current clock. [ 5.342089] systemd[1]: Mounting FUSE Control File System... [ 5.353833] systemd[1]: Mounting Kernel Configuration File System... [ 5.362162] systemd[1]: Started File System Check Daemon to report status. [ 5.384351] systemd[1]: Mounted Kernel Configuration File System. [ 5.395806] systemd[1]: modprobe@drm.service: Succeeded. [ 5.397361] systemd[1]: Finished Load Kernel Module drm. [ 5.398729] systemd[1]: Mounted FUSE Control File System. [ 5.399651] i2c_dev: i2c /dev entries driver [ 5.410592] systemd[1]: Finished Load Kernel Modules. [ 5.426177] systemd[1]: Starting Apply Kernel Variables... [ 5.524010] systemd[1]: Finished Apply Kernel Variables. [ 5.610434] systemd[1]: Started Journal Service. [ 5.852047] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none. [ 5.922357] systemd-journald[133]: Received client request to flush runtime journal. [ 5.945080] systemd-journald[133]: File /var/log/journal/c2df7990107f4916961d78d0f5d95a53/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 7.251527] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 7.252133] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 7.252718] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 7.253240] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 7.422074] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 7.426821] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 7.426854] [vc_sm_connected_init]: start [ 7.428063] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 7.433985] mc: Linux media interface: v0.10 [ 7.445442] [vc_sm_connected_init]: installed successfully [ 7.522584] bcm2835_audio bcm2835_audio: card created with 8 channels [ 7.531189] videodev: Linux video capture interface: v2.00 [ 7.561665] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 7.564886] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 7.726617] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 7.732314] Registered IR keymap rc-cec [ 7.741485] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 7.760931] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 7.787164] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 7.792832] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 7.800964] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 7.801623] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ 7.802193] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 7.802241] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 7.807837] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 7.811667] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 7.812138] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [ 7.813185] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 7.813234] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 7.813815] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 7.820930] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 7.820969] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 7.820995] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 7.821018] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 7.821040] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 7.843747] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 7.843813] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 7.851015] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 7.856803] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 7.858945] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 7.859004] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 7.873230] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 7.897692] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 7.897727] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 7.897753] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 7.897776] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 7.897799] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 7.908961] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 7.909027] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 7.913798] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 7.926440] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 7.941184] Registered IR keymap rc-cec [ 7.989646] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 8.035478] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1 [ 8.151562] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 8.156370] Registered IR keymap rc-cec [ 8.156560] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 8.156797] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input2 [ 8.372481] random: crng init done [ 8.372504] random: 7 urandom warning(s) missed due to ratelimiting [ 8.498200] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.541626] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.561629] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 8.700688] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 8.705370] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 8.705774] Registered IR keymap rc-cec [ 8.705951] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 8.706188] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3 [ 8.728731] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.729769] usbcore: registered new interface driver brcmfmac [ 8.730001] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2 [ 8.938212] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 8.945179] Registered IR keymap rc-cec [ 8.962165] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 9.019354] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.019505] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.029572] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [ 9.046491] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4 [ 9.109911] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.161641] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.164252] Registered IR keymap rc-cec [ 9.181234] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 9.228775] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5 [ 9.328247] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.328799] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 9.329222] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.329652] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.330057] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.330417] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.330811] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.362159] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [ 9.362477] vc4-drm gpu: [drm] Cannot find any crtc or sizes [ 12.245346] uart-pl011 fe201000.serial: no DMA platform data [ 12.272899] 8021q: 802.1Q VLAN Support v1.8 [ 12.596878] Adding 102396k swap on /var/swap. Priority:-2 extents:3 across:225276k FS [ 13.089198] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 13.505677] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 13.506263] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 13.506940] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.114365] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [ 18.478659] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 19.353316] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.353366] MAI: soc_pcm_open() failed (-19) [ 19.354285] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.354306] MAI: soc_pcm_open() failed (-19) [ 19.354974] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.354990] MAI: soc_pcm_open() failed (-19) [ 19.365293] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.365325] MAI: soc_pcm_open() failed (-19) [ 19.365683] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.365708] MAI: soc_pcm_open() failed (-19) [ 19.366098] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.366129] MAI: soc_pcm_open() failed (-19) [ 19.403719] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.403744] MAI: soc_pcm_open() failed (-19) [ 19.404536] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.404557] MAI: soc_pcm_open() failed (-19) [ 19.405236] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.405257] MAI: soc_pcm_open() failed (-19) [ 19.414839] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.414866] MAI: soc_pcm_open() failed (-19) [ 19.415217] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.415238] MAI: soc_pcm_open() failed (-19) [ 19.415537] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 19.415555] MAI: soc_pcm_open() failed (-19) [ 20.734859] Bluetooth: Core ver 2.22 [ 20.734960] NET: Registered PF_BLUETOOTH protocol family [ 20.734972] Bluetooth: HCI device and connection manager initialized [ 20.735494] Bluetooth: HCI socket layer initialized [ 20.735515] Bluetooth: L2CAP socket layer initialized [ 20.735543] Bluetooth: SCO socket layer initialized [ 20.755658] Bluetooth: HCI UART driver ver 2.3 [ 20.755683] Bluetooth: HCI UART protocol H4 registered [ 20.755791] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 20.756121] Bluetooth: HCI UART protocol Broadcom registered [ 21.063615] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.063628] Bluetooth: BNEP filters: protocol multicast [ 21.063664] Bluetooth: BNEP socket layer initialized [ 21.086648] NET: Registered PF_ALG protocol family [ 21.112342] cryptd: max_cpu_qlen set to 1000 [ 21.214752] Bluetooth: RFCOMM TTY layer initialized [ 21.214877] Bluetooth: RFCOMM socket layer initialized [ 21.214901] Bluetooth: RFCOMM ver 1.11 [ 31.833003] cam-dummy-reg: disabling ** sudo vcdbg log msg ** 006129.790: brfs: File read: /mfs/sd/config.txt 006130.756: brfs: File read: 2117 bytes 006181.216: HDMI0:EDID error reading EDID block 0 attempt 0 006187.240: HDMI0:EDID error reading EDID block 0 attempt 1 006193.265: HDMI0:EDID error reading EDID block 0 attempt 2 006199.287: HDMI0:EDID error reading EDID block 0 attempt 3 006205.312: HDMI0:EDID error reading EDID block 0 attempt 4 006211.335: HDMI0:EDID error reading EDID block 0 attempt 5 006217.359: HDMI0:EDID error reading EDID block 0 attempt 6 006223.381: HDMI0:EDID error reading EDID block 0 attempt 7 006229.406: HDMI0:EDID error reading EDID block 0 attempt 8 006235.429: HDMI0:EDID error reading EDID block 0 attempt 9 006236.444: HDMI0:EDID giving up on reading EDID block 0 006256.931: HDMI1:EDID error reading EDID block 0 attempt 0 006262.953: HDMI1:EDID error reading EDID block 0 attempt 1 006268.978: HDMI1:EDID error reading EDID block 0 attempt 2 006275.001: HDMI1:EDID error reading EDID block 0 attempt 3 006281.025: HDMI1:EDID error reading EDID block 0 attempt 4 006287.047: HDMI1:EDID error reading EDID block 0 attempt 5 006293.072: HDMI1:EDID error reading EDID block 0 attempt 6 006299.095: HDMI1:EDID error reading EDID block 0 attempt 7 006305.119: HDMI1:EDID error reading EDID block 0 attempt 8 006311.141: HDMI1:EDID error reading EDID block 0 attempt 9 006312.156: HDMI1:EDID giving up on reading EDID block 0 006313.877: brfs: File read: /mfs/sd/config.txt 007421.332: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined 007423.852: *** Restart logging 007423.873: brfs: File read: 2117 bytes 007429.383: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 007435.410: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 007441.435: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 007447.460: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 007453.484: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 007459.511: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 007465.536: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 007471.562: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 007477.585: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 007483.611: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 007484.627: hdmi: HDMI0:EDID giving up on reading EDID block 0 007489.673: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 007495.698: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 007501.724: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 007507.750: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 007513.774: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 007519.801: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 007525.825: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 007531.851: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 007537.875: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 007543.902: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 007544.917: hdmi: HDMI0:EDID giving up on reading EDID block 0 007544.936: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 007549.980: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0 007556.004: hdmi: HDMI1:EDID error reading EDID block 0 attempt 1 007562.031: hdmi: HDMI1:EDID error reading EDID block 0 attempt 2 007568.055: hdmi: HDMI1:EDID error reading EDID block 0 attempt 3 007574.082: hdmi: HDMI1:EDID error reading EDID block 0 attempt 4 007580.106: hdmi: HDMI1:EDID error reading EDID block 0 attempt 5 007586.132: hdmi: HDMI1:EDID error reading EDID block 0 attempt 6 007592.157: hdmi: HDMI1:EDID error reading EDID block 0 attempt 7 007598.183: hdmi: HDMI1:EDID error reading EDID block 0 attempt 8 007604.208: hdmi: HDMI1:EDID error reading EDID block 0 attempt 9 007605.225: hdmi: HDMI1:EDID giving up on reading EDID block 0 007610.266: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0 007616.290: hdmi: HDMI1:EDID error reading EDID block 0 attempt 1 007622.316: hdmi: HDMI1:EDID error reading EDID block 0 attempt 2 007628.340: hdmi: HDMI1:EDID error reading EDID block 0 attempt 3 007634.367: hdmi: HDMI1:EDID error reading EDID block 0 attempt 4 007640.391: hdmi: HDMI1:EDID error reading EDID block 0 attempt 5 007646.418: hdmi: HDMI1:EDID error reading EDID block 0 attempt 6 007652.442: hdmi: HDMI1:EDID error reading EDID block 0 attempt 7 007658.468: hdmi: HDMI1:EDID error reading EDID block 0 attempt 8 007664.492: hdmi: HDMI1:EDID error reading EDID block 0 attempt 9 007665.509: hdmi: HDMI1:EDID giving up on reading EDID block 0 007665.526: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 007665.539: HDMI0: hdmi_pixel_encoding: 300000000 007665.552: HDMI1: hdmi_pixel_encoding: 300000000 007670.300: dtb_file 'bcm2711-rpi-4-b.dtb' 007675.131: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb 007675.149: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xc983 007688.184: brfs: File read: 51587 bytes 007705.319: brfs: File read: /mfs/sd/overlays/overlay_map.dtb 007781.470: brfs: File read: 1783 bytes 007784.822: brfs: File read: /mfs/sd/config.txt 007785.319: dtparam: audio=on 007795.746: brfs: File read: 2117 bytes 007817.461: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d-pi4.dtbo 007882.748: Loaded overlay 'vc4-kms-v3d' 008040.770: brfs: File read: 3823 bytes 008041.891: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d-pi4.dtbo 008107.095: Loaded overlay 'vc4-kms-v3d' 008107.108: dtparam: cma-512=true 008270.353: brfs: File read: 3823 bytes 008273.240: brfs: File read: /mfs/sd/cmdline.txt 008273.289: Read command line from file 'cmdline.txt': 008273.304: 'console=serial0,115200 console=tty1 root=PARTUUID=3360c6ca-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles' 008383.262: brfs: File read: 147 bytes 008924.158: brfs: File read: /mfs/sd/kernel7l.img 008924.177: Loading 'kernel7l.img' to 0x8000 size 0x6af760 008924.204: Device tree loaded to 0x2eff3000 (size 0xcf7c) 008930.153: bfs_xhci_stop 008930.166: XHCI-STOP 008930.332: xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb 008930.364: USBSTS 18 012358.547: vchiq_core: vchiq_init_state: slot_zero = 0xced80000, is_master = 1 ** sudo vcdbg log assert ** No messages available ** sudo vcdbg log ex ** No exceptions found -------------------------------------------------------------------------------- Memory -------------------------------------------------------------------------------- ** cat /proc/meminfo ** MemTotal: 3929648 kB MemFree: 3264212 kB MemAvailable: 3568236 kB Buffers: 23444 kB Cached: 429528 kB SwapCached: 0 kB Active: 88280 kB Inactive: 462468 kB Active(anon): 1048 kB Inactive(anon): 135964 kB Active(file): 87232 kB Inactive(file): 326504 kB Unevictable: 31036 kB Mlocked: 16 kB HighTotal: 3263488 kB HighFree: 2681124 kB LowTotal: 666160 kB LowFree: 583088 kB SwapTotal: 102396 kB SwapFree: 102396 kB Dirty: 156 kB Writeback: 0 kB AnonPages: 129028 kB Mapped: 143620 kB Shmem: 39236 kB KReclaimable: 18872 kB Slab: 37584 kB SReclaimable: 18872 kB SUnreclaim: 18712 kB KernelStack: 2088 kB PageTables: 5396 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2067220 kB Committed_AS: 1036752 kB VmallocTotal: 245760 kB VmallocUsed: 5796 kB VmallocChunk: 0 kB Percpu: 448 kB CmaTotal: 524288 kB CmaFree: 505264 kB ** sudo cat /sys/kernel/debug/dma_buf/bufinfo ** Dma-buf Objects: size flags mode count exp_name ino 03145728 00000000 00080005 00000006 drm 00009004 Exclusive fence: drm_sched v3d_tfu signalled Attached Devices: fec00000.v3d Total 1 devices attached Total 1 objects, 3145728 bytes ** sudo cat /sys/kernel/debug/vcsm-cma/state ** VC-ServiceHandle cb118e28 Resources Total resource count: 0 -------------------------------------------------------------------------------- Media Devices -------------------------------------------------------------------------------- ** media-ctl -d 0 -p ** Media controller API version 5.15.32 Media device information ------------------------ driver bcm2835-isp model bcm2835-isp serial bus info platform:bcm2835-isp hw revision 0x0 driver version 5.15.32 Device topology - entity 1: bcm2835_isp0 (4 pads, 4 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-isp0-output0":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-isp0-capture1":0 [ENABLED,IMMUTABLE] pad2: Source -> "bcm2835-isp0-capture2":0 [ENABLED,IMMUTABLE] pad3: Source -> "bcm2835-isp0-capture3":0 [ENABLED,IMMUTABLE] - entity 6: bcm2835-isp0-output0 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video13 pad0: Source -> "bcm2835_isp0":0 [ENABLED,IMMUTABLE] - entity 12: bcm2835-isp0-capture1 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video14 pad0: Sink <- "bcm2835_isp0":1 [ENABLED,IMMUTABLE] - entity 18: bcm2835-isp0-capture2 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video15 pad0: Sink <- "bcm2835_isp0":2 [ENABLED,IMMUTABLE] - entity 24: bcm2835-isp0-capture3 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video16 pad0: Sink <- "bcm2835_isp0":3 [ENABLED,IMMUTABLE] ** media-ctl -d 1 -p ** Media controller API version 5.15.32 Media device information ------------------------ driver bcm2835-isp model bcm2835-isp serial bus info platform:bcm2835-isp hw revision 0x0 driver version 5.15.32 Device topology - entity 1: bcm2835_isp0 (4 pads, 4 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-isp0-output0":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-isp0-capture1":0 [ENABLED,IMMUTABLE] pad2: Source -> "bcm2835-isp0-capture2":0 [ENABLED,IMMUTABLE] pad3: Source -> "bcm2835-isp0-capture3":0 [ENABLED,IMMUTABLE] - entity 6: bcm2835-isp0-output0 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video20 pad0: Source -> "bcm2835_isp0":0 [ENABLED,IMMUTABLE] - entity 12: bcm2835-isp0-capture1 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video21 pad0: Sink <- "bcm2835_isp0":1 [ENABLED,IMMUTABLE] - entity 18: bcm2835-isp0-capture2 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video22 pad0: Sink <- "bcm2835_isp0":2 [ENABLED,IMMUTABLE] - entity 24: bcm2835-isp0-capture3 (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video23 pad0: Sink <- "bcm2835_isp0":3 [ENABLED,IMMUTABLE] ** media-ctl -d 2 -p ** Media controller API version 5.15.32 Media device information ------------------------ driver bcm2835-codec model bcm2835-codec serial 0000 bus info platform:bcm2835-codec hw revision 0x1 driver version 5.15.32 Device topology - entity 1: bcm2835-codec-decode-source (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video10 pad0: Source -> "bcm2835-codec-decode-proc":0 [ENABLED,IMMUTABLE] - entity 3: bcm2835-codec-decode-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-decode-source":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-decode-sink":0 [ENABLED,IMMUTABLE] - entity 6: bcm2835-codec-decode-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video10 pad0: Sink <- "bcm2835-codec-decode-proc":1 [ENABLED,IMMUTABLE] - entity 15: bcm2835-codec-encode-source (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video11 pad0: Source -> "bcm2835-codec-encode-proc":0 [ENABLED,IMMUTABLE] - entity 17: bcm2835-codec-encode-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-encode-source":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-encode-sink":0 [ENABLED,IMMUTABLE] - entity 20: bcm2835-codec-encode-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video11 pad0: Sink <- "bcm2835-codec-encode-proc":1 [ENABLED,IMMUTABLE] - entity 29: bcm2835-codec-isp-source (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video12 pad0: Source -> "bcm2835-codec-isp-proc":0 [ENABLED,IMMUTABLE] - entity 31: bcm2835-codec-isp-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-isp-source":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-isp-sink":0 [ENABLED,IMMUTABLE] - entity 34: bcm2835-codec-isp-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video12 pad0: Sink <- "bcm2835-codec-isp-proc":1 [ENABLED,IMMUTABLE] - entity 43: bcm2835-codec-image_fx-source (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video18 pad0: Source -> "bcm2835-codec-image_fx-proc":0 [ENABLED,IMMUTABLE] - entity 45: bcm2835-codec-image_fx-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-image_fx-source":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-image_fx-sink":0 [ENABLED,IMMUTABLE] - entity 48: bcm2835-codec-image_fx-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video18 pad0: Sink <- "bcm2835-codec-image_fx-proc":1 [ENABLED,IMMUTABLE] - entity 57: bcm2835-codec-encode_image-sour (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video31 pad0: Source -> "bcm2835-codec-encode_image-proc":0 [ENABLED,IMMUTABLE] - entity 59: bcm2835-codec-encode_image-proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Sink <- "bcm2835-codec-encode_image-sour":0 [ENABLED,IMMUTABLE] pad1: Source -> "bcm2835-codec-encode_image-sink":0 [ENABLED,IMMUTABLE] - entity 62: bcm2835-codec-encode_image-sink (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video31 pad0: Sink <- "bcm2835-codec-encode_image-proc":1 [ENABLED,IMMUTABLE] ** media-ctl -d 3 -p ** Failed to enumerate /dev/media3 (-2) ** media-ctl -d 4 -p ** Failed to enumerate /dev/media4 (-2) -------------------------------------------------------------------------------- Cameras -------------------------------------------------------------------------------- ** libcamera-still --list-cameras ** [0:03:21.680927690] [1680] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3572-e13ccdd5 No cameras available! -------------------------------------------------------------------------------- Versions -------------------------------------------------------------------------------- ** uname -a ** Linux raspberrypi 5.15.32-v7l+ #1538 SMP Thu Mar 31 19:39:41 BST 2022 armv7l GNU/Linux ** cat /etc/os-release ** PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" ** vcgencmd version ** Mar 24 2022 13:19:26 Copyright (c) 2012 Broadcom version e5a963efa66a1974127860b42e913d2374139ff5 (clean) (release) (start) ** libcamera-still --version ** libcamera-apps build: 1cdc057d2db9-intree 24-05-2022 (11:11:05) libcamera build: v0.0.0+3572-e13ccdd5 -------------------------------------------------------------------------------- libcamera-still -t 1000 -o test.jpg -------------------------------------------------------------------------------- Made X/EGL preview window [0:03:21.062745305] [1639] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3572-e13ccdd5 ERROR: *** no cameras available ***